The IC-2730A provides VHF/VHF, UHF/UHF simultaneous receive capability as well as VHF/UHF receive. Main dials, volume, squelch knobs and primal buttons are symmetrically laid out for each band.
Optional VS-3 Bluetooth® Headset
The optional VS-3 Bluetooth® headset can wirelessly control the IC-2730A with three programmable keys and a PTT button. It also provides VOX operation for hands-free communication.
* Optional UT-133/A Bluetooth® unit must be installed in the IC-2730A.
Easy-to-See Large White Backlit LCD
The display size of the IC-2730A is 1.5 times larger than its predecessor, the IC-2720H. Frequency display and channel names are larger, and the white backlit provides higher contrast.
Easy Controller Mounting with the Optional MBF-1
The combination of the optional MBF-1 suction cup mounting base and MBA-5 controller bracket provides easy tilt and swivel adjustments. The large suction cup can be mounted on flat surfaces and can be removed easily.
Photo includes optional MBF-1 and MBA-5
50 watts of output on VHF and UHF
The IC-2730A employs a durable PA module and delivers 50 watts of high power operation on both VHF and UHF bands.
Built-in 50 CTCSS and 104 DTCS tones with Split Tone Function
The CTCSS and DTCS tones are built-in for quiet stand-by and repeater access. The split tone function allows you to set CTCSS/DTCS tones separately for repeater uplink and downlink on a per channel basis.
Controller Attachment to the Main Unit with Optional MBA-4
With the optional MBA-4 combination bracket, the controller can be attached to the main unit. The microphone jacks are mounted on both the controller and main unit.
Wideband Receiver
The IC-2730A covers 118–174 and 375–550MHz. You will be able to listen to aviation, marine, weather channels and other utility communications.
Optional Active Noise Canceling Microphone
The optional active noise canceling microphone HM-209 can automatically reduce noise in extremely noisy environments and assist in transmitting clear and accurate audio.
Other Features
HM-207 remote control microphone
CS-2730 Free download PC programming software
Versatile scanning capability
Squelch delay and squelch attenuator
Sub band auto mute function
Sub band busy beep function
Auto repeater functions (Depending on the transceiver version)
Auto power off
Time-out-timer
16 DTMF auto dial memories
Weather channel receive with weather alert (USA version only)
CI-V remote control capability (through the OPC-478UC)
Specifications
General
Guaranteed range:
*1 144–148, 430–450MHz.
*2 144–148, 430–440MHz
Transmitter
Receiver
* Except amateur bands.
Applicable U.S. Military Specifications
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
Also meets equivalent MIL-STD-810-C, -D -E and -F.
All stated specifications are subject to change without notice or obligation.
