Icom Custom High Power Handling Capacity Speaker for 1500 mW Powerful Audio
Optional 1500 mW Speaker-Microphone, HM-222HLWP*
* For the transceiver with a "U" mark on the serial number label. Not available for USA version.
Compact, Waterproof Durable Design (IP67 and MIL-STD-810-G)
Enhanced Emergency Safety with Built-in Motion/Stationary Detection Sensor
128 Channel Capacity with Eight Zones (Simple Type and Ten-Key Type)
Built-in 2-Tone, 5-Tone, CTCSS and DTCS
MDC and BIIS Compatible
16-Code Inversion Voice Scrambler
Man Down and Lone Worker Functions
Channel Announcement
Up to 14 Hours of Operating Time with Supplied BP-279 Battery
General Features
- 136–174, 335–380, 400–470, 450–512, 450–520 MHz versions
- 1500 mW large volume audio from Icom custom speaker
- Improved sound clarity
- Compact (52.2 × 111.8 × 24.5 mm; 2.1 × 4.4 × 1.0 in) and lightweight (240 g; 8.5 oz with BP-279)
- IP67 waterproof and dust-tight protection
- Tested to 12 categories of MIL-STD-810-G environmental tests
- DTMF autodial memories
- 16-position rotary selector and ON/OFF volume knob
- “Shift key” function increases number of programmable key assignments
- Up to 14 hours of operating time with supplied BP-279 battery pack
- Eight character alphanumeric display (Ten-keypad/simplekeypad versions)
- Three color LED
Safety and Security
- 16-code inversion voice scrambler
- Radio Stun/Revive/Kill commands (2-Tone and 5-Tone, RX only)
- Radio Stun/Revive commands (MDC, RX only)
- Auto TX function (2-Tone and 5-Tone)
- MDC emergency call with open microphone function (MDC, RX only)
- Man down function
- Lone worker function
- Motion and stationary detection function
- Surveillance function temporarily turns OFF the beep and LED indicator
- Power ON password (for the simple type and 10-key type)
- Emergency key for emergency call
Signaling Functions
- CTCSS and DTCS tone
- 2-Tone and 5-Tone
- MDC PTT ID, Emergency (TX/RX), Radio Check (RX), Stun (RX), Revive (RX)
- Up to 100 ID numbers and names can be saved to show the alias name, instead of the ID number
- BIIS PTT ID transmission
Scan Functions
- Priority scan monitors one or two priority channels while scanning non-priority channels
- Mode dependent scan automatically changes the scan list according to the operating channel
- Power ON scan function
- Talk back timer
Voice/Audio Functions
- Channel announcement function
- VOX function for hands-free operation
- Audio compander
- Siren sound for security alarm
Specifications
General
*16k0F3E (30 kHz bandwidth) is no longer available for FCC Part 90 licensees for USA versions.
Transmitter
* 25 kHz bandwidth is no longer available for FCC Part 90 licensees for USA versions.
Receiver
All stated specifications are subject to change without notice or obligation.
Measurements made in accordance with TIA-603 (USA/EXP) or EN 300-086 (EUR).
* For the transceiver with "U" make on the serial number label.
Function Comparison and Internal Unit Options
Applicable U.S. Military Specifications
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
Also meets equivalent MIL-STD-810-C, -D -E and -F.
Ingress Protection Standard (IC-F1000/T/S, IC-F2000/T/S & HM-168LWP)
Dust & Water : IP67 (Dust-tight and waterproof protection)
All stated specifications are subject to change without notice or obligation.
Supplied accessories
- Battery pack, BP-279
- Desktop charger, BC-213*
- AC adapter, BC-123SA/SE/SUK/SV or BC-242*
- Belt clip, MB-133
- Antenna
*May differ depending on version
